Related Manuals for NIMO ETS 1500
Summary of Contents for NIMO ETS 1500
- Page 1 ETS 1500 ETS 1500 F 427000544 Keep this user ma- nual in a safe place, Drying Cabinet User Manual so that it will always be on hand for fu- ture reference.
- Page 2 When you buy a NIMO product you can be sure that the inside is as good as the outside and that the ethics and morale that go into building this product are just as high as the quality and functionality you are getting.
-
Page 3: Table Of Contents
REPLACEMENT PARTS REHANGING THE DOOR TROUBLE SHOOTING POSITIONING TECHNICAL DATA EXHAUST CONNECTION, MODEL ETS 1500 EXHAUST, MODEL ETS 1500F ELECTRICAL CONNECTIONS USING FOR THE FIRST TIME ABOUT THIS USER MANUAL The contents of this user manual describe the dryer functions and how it should be used. The manual also includes instructions for installa- tion and maintenance. -
Page 4: Important Safety Information
IMPORTANT SAFETY INFORMATION This drying cabinet meets applicable safety requirements. Incorrect use may, however, lead to injuries and damage to property. The advice and caution notices in this manual have been written to en- able you to avoid incorrect use and unnecessary risks of accidents, and should be read before installing and using the drying cabinet. -
Page 5: Technical Safety
IMPORTANT SAFETY INFORMATION TECHNICAL SAFETY Check the drying cabinet for visible signs of damage before install- ing it. A damaged drying cabinet must not be used as it may pose a hazard. The drying cabinet must be installed and kept indoors. The drying cabinet may only be connected to an earthed power socket installed in accordance with applicable safety instructions. -
Page 6: For A Good Environment
FOR A GOOD ENVIRONMENT PACKAGING MATERIAL MANAGEMENT OF END-OF-LIFE DRYING CABINET The packaging that protects the drying cabinet against damage in transit has been chosen with When the drying cabinet has reached the end concern for the environment in mind and is of its life, it must be taken to a recycling centre therefore recyclable. -
Page 7: Installation
A cabinet with a fan unit installed foam should be kept out of the reach of children. Assembly kit ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ User manual Assembly kit model ETS 1500F Assembly kit model ETS 1500 Qty. Draft stabilizer Hose Qty. Spigot Screw TRX 5x70 fzk... -
Page 8: Fitting The Door Handle
INSTALLATION FITTING THE DOOR HANDLE Fit the door handle with the fixing screws supp- lied. The illustration shows model ETS 1500 REHANGING THE DOOR ______________________________________ 4 Slant the module out so as to gain access to WARNING! The plug must be unplugged from the lower hinge pivot pin. -
Page 9: Positioning
Screws are supplied in the installation kit. shows model 2 Hang up the cabinet. ETS 1500 The cabinet must be secured to the wall to prevent it tipping forward. 3 Open the door and drill 8 mm holes in the wall through the four pre-drilled holes in the rear of the drying cabinet. -
Page 10: Exhaust Connection, Model Ets 1500
INSTALLATION EXHAUST CONNECTION, MODEL ETS 1500 When the drying cabinet is working, 45 m³ of moist air are evacuated per hour. This air is taken from the room where the dryer is sited. Hence make sure air can enter the room to replace the moist air leaving. - Page 11 INSTALLATION 2. Permanently installed and connected to the evacuation duct When the drying cabinet is permanently con- ___________________________________ nected to the evacuation duct, the whole room The insert is not included. is ventilated by way of the drying cabinet. ___________________________________ ___________________________________ Fit the spigot supplied to the hose.
-
Page 12: Exhaust, Model Ets 1500F
INSTALLATION EXHAUST, MODEL ETS 1500F ___________________________________ The air intake must not be blocked. ___________________________________ Air intake Humid air out... -
Page 13: Electrical Connections
INSTALLATION ELECTRICAL CONNECTIONS The drying cabinet should be connected to a 230 V 1-phase 50 - 60 Hz grounded socket. The drying cabinet is supplied ready for connec- tion with a cable with a grounded plug. ______________________________________ The drying cabinet should be connected using the plug supplied to a grounded wall socket, and should not be in the form of a fixed connection! ______________________________________... -
Page 14: Using For The First Time
USING FOR THE FIRST TIME _____________________________________ _____________________________________ CAUTION! Read the safety instructions on page Read these directions for use before using the drying cabinet for the first 4 and 5 before using the cabinet. _____________________________________ time. _____________________________________ 1 Check that the cabinet is firmly secured to the wall. -
Page 15: Using The Drying Cabinet
ETS 1500 Remember not to hang knitted articles. These _____________________________________ can be stretched when they are heavy with NOTE: The sealing strip in the door may not water. -
Page 16: Settings
USING THE DRYING CABINET SETTINGS The cabinet is provided with two selector knobs for setting the positions for different power capacities. The left selector knob regulates heating capacity by means of a continuous scale of temperature positions. The right selector knob regulates drying time by Temperature Drying time means of a continuous scale up to four hours. -
Page 17: Care
This information can be found on the data plate located inside the cabinet. Data plate (inside) ETS 1500/1500F Name of the drying cabinet Article number Serial number (12 digits) ______________________________________ Follow NIMO instructions when carrying out repairs or replacing parts. ______________________________________... -
Page 18: Trouble Shooting
TROUBLE SHOOTING Trouble Cause What to do The drying cabinet is not giving Is it plugged in? Check. out any heat even though the temperature selector knob is Is the fuse in working Check. set to fast setting and the fan order? is activated. -
Page 19: Technical Data
TECHNICAL DATA Capacity: approx. 3.5 kg washing (cotton) Manufactoring standard See the identification plate Drainage capacity: 17 g/min. Electrical connections: 230 V, 50-60 Hz Motor: 35 W Electrical circuit diagram Heating element: 1500 W The electrical circuit diagram can Overheating cut-out: be ordered from the manufactu- rer.
Need help?
Do you have a question about the ETS 1500 and is the answer not in the manual?
Questions and answers