netvox R718PQA User Manual
  1. Manuals
  2. Brands
  3. netvox Manuals
  4. Accessories
  5. R718PQA
  6. User manual

netvox R718PQA User Manual

Wireless toilet occupancy sensor
Hide thumbs Also See for R718PQA:
Table of Contents

Advertisement

Quick Links

Download this manual
R718PQA
Wireless Toilet Occupancy Sensor
Wireless Toilet Occupancy Sensor
R718PQA
User Manual
Copyright©Netvox Technology Co., Ltd.
This document contains proprietary technical information which is the property of NETVOX Technology. It shall
be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written
permission of NETVOX Technology. The specifications are subject to change without prior notice.

Advertisement

Table of Contents
loading

Related Manuals for netvox R718PQA

Summary of Contents for netvox R718PQA

  • Page 1 User Manual Copyright©Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written...

  • Page 2: Table Of Contents

    Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4. Set up Instruction ..............................4 5. Data Report ................................5 5.1 Example of ReportDataCmd..........................6 5.2 Example of ConfigureCmd ..........................6 5.3 Example for MinTime/MaxTime logic......................8 6.

  • Page 3: Introduction

    1. Introduction R718PQA is a long-range wireless occupancy and door sensor for Netvox Class A type devices based on LoRaWAN open protocol. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

  • Page 4: Appearance

    ⚫ Low power consumption and long battery life Note*: Battery life is determined by the sensor reporting frequency and other variables, please refer to http://www.netvox.com.tw/electric/electric_calc.html On this website, users can find battery life time for varied models at different configurations.

  • Page 5: Set Up Instruction

    4. Set up Instruction On/Off Power on Insert batteries. (users may need a screwdriver to open) Turn on Press and hold the function key for 3 seconds till the green indicator flashes once. Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till green indicator flashes for 20 times. Power off Remove Batteries.

  • Page 6: Data Report

    The data transmission period of the device is subject to the programming configuration before shipment. The interval between two reports must be the mintime The data parsing reported by the device is referenced by the Netvox LoraWAN Application Command document and http://www.netvox.com.cn:8888/page/index Data report configuration and sending period are as following: Current Change＜...

  • Page 7: Example Of Reportdatacmd

    Version– 1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version DeviceType– 1 byte – Device Type of Device The devicetype is listed in Netvox LoRaWAN Application Devicetype doc ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the devicetype NetvoxPayLoadData– Fixed bytes (Fixed =8bytes)
  • Page 8 Reserved 0x02 ReportReq (9Bytes,Fixed 0x00) ReadConfig MinTime MaxTime BatteryChange Reserved 0x82 ReportRsp (2bytes Unit:s) (2bytes Unit:s) (1byte Unit:0.1v) (4Bytes,Fixed 0x00) R718PQA 0x97 IRDisableTime IRDectionTime Reserved 0x03 IRDisableTImeReq (2bytes Unit:s) (2bytes Unit:s) (5Bytes,Fixed 0x00) Status Reserved 0x83 IRDisableTImeRsp (0x00_success) (8Bytes,Fixed 0x00)

  • Page 9: Example For Mintime/Maxtime Logic

    (4) Read IRDisableTIme and IRDectionTime Downlink: 0497000000000000000000 Devices return: 8497001E001E0000000000 (current device configuration parameters) 5.3 Example for MinTime/MaxTime logic Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V MaxTime MaxTime Sleeping(MinTime) Sleeping(MinTime) Wake up and collects data Wakes up and collects data Wakes up and collects data REPORTS 3.6V...
  • Page 10 Notes: 1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not collect data. 2) The data collected is compared with the last data reported. If the data variation is greater than the ReportableChange value, the device reports according to MinTime interval.

  • Page 11: Ir Disable Time And Detection Time

    To save the power, when R718PQA detects the infrared signal, it will enter IRDetectionTime period. If there is no infrared signal detected in IRDetectionTime period.

  • Page 12: Information About Battery Passivation

    7. Information about Battery Passivation Many of Netvox devices are powered by 3.6V ER14505 Li-SOCl2 (lithium-thionyl chloride) batteries that offer many advantages including low self-discharge rate and high energy density. However, primary lithium batteries like Li-SOCl2 batteries will form a passivation layer as a reaction between the lithium anode and thionyl chloride if they are in storage for a long time or if the storage temperature is too high.

  • Page 13: Important Maintenance Instruction

    8. Important Maintenance Instruction Kindly pay attention to the following in order to achieve the best maintenance of the product: • Keep the device dry. Rain, moisture, or any liquid might contain minerals and thus corrode electronic circuits. If the device gets wet, please dry it completely.

Table of Contents