Advertisement
Quick Links
Advertisement
Related Manuals for gofanco KVMHD20Ext
Summary of Contents for gofanco KVMHD20Ext
- Page 1 HDMI 2.0 USB KVM CAT Extender - 70m User's Guide P/N: KVMHD20Ext G4-0114A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
- Page 3 • Shut off power and make sure environment is safe before installation • Do not plug the HDMI cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports • Use the included DC5V power adapters only.
- Page 4 Introduction The HDMI 2.0 USB KVM CAT Extender - 70m extends HDMI and USB signals up to 70 meters (230ft) over a single CAT6/7 cable. Features • Supports up to 4K@60Hz and HDR with nearly zero latency • KVM extension with 2 USB 1.1 keyboard and mouse ports to control a PC at a remote location •...
-
Page 5: Product Layout
Product Layout Figure 1: Transmitter (TX) Off: No PC connection or no USB signal detected KVM LED On: PC connected and USB detected properly Flashing: USB signal transmission detected Reset Press to restart the Transmitter (TX) unit RJ45 Out Connects to the Receiver's RJ45 port using a CAT cable Flashing: Powered on, no HDMI signal detected Power LED On: Powered on, HDMI signal detected... - Page 6 Figure 2: Receiver (RX) Off: No USB device connected KVM LED On: USB device connected Reset Button Press to reset the Receiver (RX) unit RJ45 In Connects to the Transmitter's RJ45 port using a CAT cable Flashing: Powered on, no HDMI signal detected Power LED On: Powered on, HDMI signal detected Power Jack...
- Page 7 Hardware Installation Power off all devices including your PC and HDMI display(s). Connect your PC's HDMI output to the Transmitter's HDMI In connector with an HDMI cable (HDMI cable not included). Connect the Transmitter's USB port to the PC's USB port using the included USB Type-A to Type-A cable.
- Page 8 Plug the included power adapters into the Transmitter's and Receiver's power jack, then plug the power adapters into a reliable power source. Power on all connected devices. 10. The extender is ready for use. CAT Cable Wiring We suggest both RJ-45 connectors be wired identically following T568B wiring standard for the best performance and compatibility.
-
Page 9: Application Diagram
Application Diagram FAQ & Solutions There is no video output or video is not normal: 1) Check all cable connections. 2) Press the reset button on the Transmitter and Receiver units. The extender is not working properly: 1) Please check the cable lengths below: - HDMI cables: Up to 3 meters - Network cables: Up to 70 meters 2) Press the reset button on bothTX &... -
Page 10: Specifications
Specifications HDMI Compliance HDMI 2.0 HDCP Compliance HDCP 2.2 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 800x600, 1024x768, 1280x768, 1280x800, 1280x960, 1360x768, 1366x768, 1600x900, Resolution 1680x1050, 1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz Transmission Distance Cat6/7: < 70 meters Input and Output TMDS 0.7 - 1.2Vp-p (TMDS) Signal Input and Output DDC 5Vp-p (TTL) - Page 11 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products.
- Page 12 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the KVMHD20Ext and is the answer not in the manual?
Questions and answers