Subscribe to Our Youtube Channel
Related Manuals for gofanco KVMHDExt4K
Summary of Contents for gofanco KVMHDExt4K
- Page 1 HDMI USB KVM CAT5e/6 Extender 4K - 100m User's Guide Part Number: KVMHDExt4K (Kit) KVMHDExt4K-RX (RX) G4-0075A...
- Page 2 Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
- Page 3 PC, at the receiver(s) side • Transmitter (TX) is equipped with an HDMI output for a local HDMI display • Works over dedicated IP networks, additional Receiver units (part# KVMHDExt4K-RX) sold separately Package Contents • Transmitter (TX) unit (1pc) •...
-
Page 4: Product Layout
Product Layout Figure 1: Transmitter (TX) HDMI IN Connects to the PC's HDMI output HDMI Out Connects to an HDMI display Connects to the Receiver's RJ45 In connector using a CAT RJ45 Out cable Connects to the computer's USB port using the included USB Port USB cable Power Jack... - Page 5 Figure 2: Receiver (RX) USB Ports (x2) Connects to keyboard or mouse RJ45 In Connects to the Transmitter's RJ45 port using a CAT cable HDMI Out Connects to an HDMI display Power Jack Connects to the included power adapter Power LED On when the Receiver (RX) is powered on On when the Transmitter (TX) and Receiver (RX) are Link LED...
-
Page 6: Hardware Installation
Hardware Installation Power off all devices including your HDMI source and HDMI display(s). Connect your PC's HDMI output connector to the Transmitter's HDMI In connector with an HDMI cable (HDMI cable not included). Connect the Transmitter's USB port to the PC's USB port using the included USB Type-A to Type-B cable. - Page 7 CAT Cable Wiring We suggest both RJ-45 connectors be wired identically following T568B wiring standard for the best performance and compatibility...
- Page 8 Application Diagram On-to-One Connection One-to-Many Connection Requires dedicated Gigabit Ethernet Switch. Additional receiver units (part# KVMHDExt4K-RX) sold separately. Keyboard and Mouse Device Control One-to-Many Configuration Press the USB Contol button on the receiver unit to take control of the keyboard and mouse functions.
- Page 9 FAQ & Solutions There is no video output or video is not normal: 1) Check power adapter and all cable connections. 2) Press reset button on the Transmitter and Receiver units. The power indicator is on but the connection indicator is off: 1) Make sure the network cable follows the IEEE- T568B wiring standard.
-
Page 10: Specifications
Specifications Item Specifications Compliance HDMI 1.4 & HDCP 2.2 HDMI Bandwidth 10.2Gbps 800x600@60Hz, 1024x768@60Hz, 1280x720@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1440x900@60Hz, Resolution 1680x1050@60Hz, 1920x1080@60Hz, 2560x1080@60Hz, 3840x2160@30Hz, 4096x2160@30Hz Audio Support PCM, LPCM, Dolby, DTS TMDS Signal (Input & 0.7 - 1.2Vp-p Output) DDC Signal (Input & 5Vp-p(TTL) Output) HDMI Cable Length... - Page 11 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the acutal products.
- Page 12 Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the KVMHDExt4K and is the answer not in the manual?
Questions and answers