Advertisement
PC CONFIGURATOR
The following parameters can be set with using PC Configurator Software (model: R80CFG)
Refer to the users manual for the R80CFG for detailed operation of the software program.
■ CHANNEL INDIVIDUAL SETTING
ITEM
Unused setting
CH enabled
CH disabled
Input type
DC voltage
DC current
Zero fine adj.
-320.00 - +320.00 (%)
Gain fine adj.
-3.2000 - +3.2000
Zero base
depends on input types*
Full base
depends on input types*
Zero scaling
-32,000 - +32,000
Full scaling
-32,000 - +32,000
*1. For details, refer to the users manual of R80CFG
■ CHANNEL BATCH SETTING
ITEM
Version no.
–
Simulate input
Normal input
Simulated data
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit : mm [inch]
SETTING RANGE
-10 - +10 V DC
-20 - +20 mA DC
1
1
SETTING RANGE
24 [.94]
(3 [.12])
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
DEFAULT VALUE
CH enabled
-10 - +10 V DC
0.00 (%)
1.0000
-10.000 V
10.000 V
0
10,000
DEFAULT VALUE
–
Normal input
72 [2.83]
(4 [.16])
55 [2.17]
DIN rail
(35mm wide)
R80FST4NJ
EM-7029 P. 6 / 7
Advertisement
