Hard disk drive (HDD) / solid state disk (SSD)
Installing additional PCIe SSD modules
▶ Remove the dummy locks, see
module" on page
▶ Install additional PCIe SSDs, see
on page
181.
The PCIe SSDs are installed in the same frames as the 2.5-inch
HDD/SSD modules.
Concluding steps
▶
"Installing the fan holder" on page
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ Update the server configuration, see
page
94.
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
7.5.15
Removing the 4x 2.5-inch PCIe SSD backplane
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
204
"Removing a 2.5-inch HDD/SSD dummy
173.
"Installing a 2.5-inch PCIe SSD module"
61.
59.
51.
57.
Upgrade and Maintenance Manual
56.
"Using the Chassis ID Prom Tool" on
88.
Hardware: 10 minutes
Software: 10 minutes
65.
45.
46.
RX2520 M5