Fujitsu PRIMERGY RX2520 M5 Upgrade And Maintenance Manual page 398

System board and components
▶ Remove the TPM screw (3).
▶ Remove the TPM on the upper side of the system board.
Figure 261: Removing the TPM spacer
▶ Using a flat nose pliers, press together the hooks on the TPM spacer and
remove it from the system board.
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
▶ Install the system board, see
Concluding steps
▶
"Installing the crossbar" on page
▶
"Installing the fan holder" on page
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
398
"Installing the new system board" on page
63.
61.
59.
51.
56.
57.
Upgrade and Maintenance Manual
88.
428.
RX2520 M5