Fujitsu PRIMERGY RX2520 M5 Upgrade And Maintenance Manual page 180

Hard disk drive (HDD) / solid state disk (SSD)
If the PCIe SSD module is controlled by a RAID controller of the PRAID
EP5x0i family, the PCIe SSD module can be installed during operation
(hot-plug), see
Preliminary steps
▶ Locate the correct drive bay, see
▶ Depending on your OS (see the "NVMe User Guide"):
server" on page
Removing a 2.5-inch HDD/SSD dummy module
Figure 90: Removing a 2.5-inch HDD/SSD dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
180
"Installing 2.5-inch HDD/SSD modules" on page
"Overview of configurations" on page
45.
Upgrade and Maintenance Manual
172.
167.
"Shutting down the
RX2520 M5