Fujitsu PRIMERGY RX2520 M5 Upgrade And Maintenance Manual page 146

Hard disk drive (HDD) / solid state disk (SSD)
Figure 58: Connecting cables to the backplane (example 4x 3.5-inch HDDs)
▶ Connect the following cables to the HDD backplane:
1 SAS cable to connector "X9"
2 If applicable, OOB cable to connector "X11"
3 Power cable to connector "X40"
4 If applicable, ODD power cable to connector "X17" (only for the first
backplane)
Concluding steps
▶ If applicable
"Installing the CPU and heat sink" on page
▶
"Installing the fan holder" on page
▶
"Installing the air duct" on page
▶ Install HDD modules or HDD dummy modules into all HDD bays, see
"Installing a 3.5-inch HDD module" on page 134
dummy module" on page
146
61.
59.
136.
Upgrade and Maintenance Manual
288.
and "Installing a 3.5-inch
RX2520 M5