Hard disk drive (HDD) / solid state disk (SSD)
Figure 40: Installing the 2.5-inch HDD/SSD in the 3.5-inch installation frame (B)
▶ Fasten the 2.5-inch HDD/SSD with four screws.
Removing a 2.5-inch HDD/SSD from a 3.5-inch installation frame
▶ Please proceed in reversed order.
Concluding steps
No steps needed.
7.3.3
3.5-inch HDD and 3.5-inch installation frame
Installing or removing the installation frame is only necessary for Japan.
Customer Replaceable
Unit (CRU)
Tools:
Phillips PH1 / (+) No. 1 screw driver
128
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2520 M5