GigRig G2 User Manual page 7

10. Effects Loops – These effects loop buttons are where you program the effects that you
want to have turned on for a particular sound.
11. PRE GAIN ON – This button will turn on the PRE GAIN feature for this pre-set.
12. PRE GAIN VOLUME SELECT – These two UP and DOWN buttons allow you to
precisely set the level of PRE gain. Hold the button down to increase rapidly, or press
individually for fine tuning.
13. PRE GAIN LEVEL INDICATOR – This is a visual reference on where you POST GAIN
volume is set. Remember that no matter where it's set, it needs to be activated by
pressing the POST GAIN ON button (number 7)
14. TUNER/AUX – This turns on the tuner output on the back panel of G2. You can have
any preset set up as your tuner out.
15. TheGigRig LOGO – This backlit logo tells you that the power is on and will also let you
know when you are in the HIDDEN PRESET. Go to any preset, you will see the red LED
light up saying that you are on that pre-set. Now press it a second time and you are in
the HIDDEN PRESET, at the same time the logo will turn blue to indicate that you are in
the hidden preset. You can set this up as a bypass, or a tuner, anything you like. I
personally like to have this set up as a tone that I use often as I can get back to it from
anywhere on G2.
1. INPUT – Plug your guitar in here
2. 2. TUNER/AUX OUT – Connect your tuner here. This is activated by the TUNER/AUX
button on the top panel of G2.
3. EFFECTS LOOPS SEND – These SEND jacks are connected to the INPUT of your
pedal. Loops 1~9 are mono sends, and loop 10 has stereo sends. If you are only using a
mono pedal, use the 10m send
4. EFFECTS LOOPS RETURN – This is where you connect the OUTPUT of your effects.
Loops 1~8 have mono returns while loops 9 & 10 both have stereo returns.
P a g e 6
© TheGigRig Ltd 2013