GigRig G2 User Manual page 30

Q. Can I have my effects off stage or behind my amp and just have G2 control everything?
A. Yes, we are releasing the G2 EXT kit in August 2013 which will give you the ability to disconnect
the back panel of G2 where all of your effects are connected and put it in a rack or in a separate pedal
board and have it stashed out of the way so the only thing on the stage is G2.
Q. How do I connect G2 to my Pedaltrain?
A. Using our Pedaltrain brackets, G2 can securely connect to your Pedaltrain without any messy
Velcro. The brackets attach to the underside of G2 using the screws provided, then using the cable ties
also provided, lock directly to the Pedaltrain.
Q. How can I get more loops?
A. Yu can use Remote Loops 2's controlled by the Remote Switches for an extra 2 or 4 programmable
loops or you can connect two G2's together and 20 programmable loops per preset!
Q. What order should I place my effects in?
A. I cover this in detail on the website under the Top Tone Tips section, but in short, I believe this is a
good place to start.
P a g e 29
© TheGigRig Ltd 2013