Buttons And Connections - GigRig G2 User Manual

3. B
UTTONS AND
1. Footswitch – There are 14 footswitches on the G2.
2. Phase Out 2 – This button reverses the phase on OUT2. If you use
two amps then you can ensure that both amps are always in phase.
This is a global command and effects ALL footswitches, however, it
is possible to program a different phase per preset. See the
Advanced Functions section.
3. Bank Up Engage – This gives you access to the second bank of 15 pre-sets. It's also
switchable remotely via the Bank Up input on the back panel.
4. OUTPUTS 1&2 – Choose any combination of outputs 1&2 per preset.
5. STOMP BOX MODE – You can set up your presets in 2 different states. The first is
standard preset mode where you press the footswitch and it clears the previous
selection, and the second is STOMP BOX MODE which lets you add/layer sounds
together WITHOUT clearing the previous sound.
6. REMOTE SWITCHES – There are 4 remote switches via 2 TRS connections.
7. POST GAIN ON – This button will turn on the POST GAIN feature for this pre-set.
8. POST GAIN VOLUME SELECT – These two UP and DOWN buttons allow you to
precisely set the level of POST gain. Hold the button down to increase rapidly, or press
individually for fine tuning.
9. POST GAIN LEVEL INDICATOR – This is a visual reference on where you POST GAIN
volume is set. Remember that no matter where it's set, it needs to be activated by
pressing the POST GAIN ON button (number 7).
P a g e 5
© TheGigRig Ltd 2013
C
ONNECTIONS