GigRig G2 User Manual page 10

The order in which you place the effects in the loops has a big difference on your sound.
There's more information in the 'Tone Tips' section of TheGigRig.com
Stereo Loops
For lovers of stereo effects, G2 includes 2 stereo EFFECTS LOOPS. Loop 9 has a mono send
and stereo return, loop 10 has a stereo send and stereo return. These are clearly marked on the
back panel. If you are using MONO effects then use the send and returns on the left marked 'M'.
For stereo effects use connect the second stereo connection to the send and returns marked
with 'ST'. G2 automatically detects if the stereo connections are made and when either of these
loops are selected, routes the stereo signal left and right through G2's outputs 1&2.
Once you have selected your combination of effects loops, that combination is automatically
stored. Every time you press a button on G2, every time you select or de-select an effects loop
or control feature, it is stored to whatever preset you are on. Don't look for a store button, there
is one. G2 takes does it all
Designed using the same techniques as aircraft software, for freeze free reliable operation, it
makes sure you don't lose your settings. Even if the power is lost in the middle of changing a
patch it will remember your last action. To make sure you can't go wrong it also stores all your
settings for over 40 years, even with the power switched off!
P a g e 9
© TheGigRig Ltd 2013