GigRig G2 User Manual page 19

Delay Trails
Another amazing function of G2 is the ability to have your delay 'spillover' into the next preset using a
built in mixer in combination with our Post Gain amplifier. You can have your delay in either loop 9 or 10
There are 3 easy steps to set this up
1. First you must move the Post Gain amplifier AFTER your delay pedal. If the Post Gain is before it
can create a feedback loop which can cause real issues. Power up holding down footswitch 5.
You'll see the Effects Loop lights flashing. Now press the effects loop button you want to place
the Post Gain amp AFTER. If your delay is in loop 9, then press 9 or 10. If your delay is in 1o, then
press 10.
2. Turn on the Delay Trails function. Power up holding down 9 if your delay is in 9, or 10 if your
delay is in 10.
3. Your trails function is now ON. To set up a sound with trails you must have the Post Gain
amplifier selected in the sound where you want trails. For example, choose a sound that uses
your delay, and then go to a sound with the Post Gain selected, and you will hear the echo trail
over the new sound. If you go to a sound WITHOUT the Post Gain selected, the sound will have
no trails. His way you can actually choose which sounds will have trails and which ones won't.
Remember, the Post Gain amp must be AFTER the loop with your delay in to use trails .
P a g e 18
© TheGigRig Ltd 2013