Table of Contents
Advertisement
Attach the Slide Room Fascia
Do not attempt to operate the slide room until both the exterior T-molding and the interior fascia
1.
Attach the interior slide room fascia.
2.
Interior slide room fascia must be attached prior to operating the slide room for safety precautions.
3.
Apply Tripolymer sealant to the back of the upper exterior wipe seal and lay it over the top of the
vertical wipe seal on the column (Fig. 13A).
Rev: 08.20.21
are attached to the slide room.
Fig. 13
Page 8
A
CCD-0003696
Advertisement
Table of Contents
Need help?
Do you have a question about the Tiffin Through Frame Low profile Slide-out and is the answer not in the manual?
Questions and answers