Table Of Contents; Introduction - Lippert Tiffin Through Frame Low profile Slide-out Installation Manual

Introduction
Safety
Resources Required
Slide-outs onto the Chassis
Install the Room Mounted Brackets to the Hydraulic Slide-out
Slide Room Preparation
Installing the Slide Room
Attach Room Mounted Brackets to the Slide Room
Attach the Slide Room Fascia
Horizontal Room Adjustment
Vertical Room Adjustment
Slide-out Extend/Retract Adjustments
Adjusting the Slide Room's Retracted Position
Adjusting the Slide Room's Extended Position
Hydraulic Power Unit
System Wiring Requirements
Purging the Hydraulic system
Fluid Recommendation
Purging the System
Slide-out Prior to Operation
Operation
Extending Slide-out Room
Retracting Slide-out Room
Slide-out Troubleshooting
Manual Override
Resources Required
Slide-out Wiring Diagram
Hydraulic Plumbing Diagram
Notes

Introduction

The Hydraulic Slide-out System's purpose is to hydraulically actuate slide-out rooms. Its function should
not be used for any purpose or reason other than to actuate the slide-out room. To use the system for any
reason other than what it is designed for may result in death, serious injury or damage to the coach.
Additional information about this product can be obtained from lci1.com/support or the LippertNOW app is
available for free on Apple App Store® for iPhone® and iPad® and also on Google Play™ for Android™ users.
App Store® and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/through-frame-selections
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.
Rev: 08.20.21

TABLE OF CONTENTS

Page 2
2
3
4
4
5
6
6
7
8
9
9
10
10
10
11
13
14
14
14
15
15
15
15
16
17
17
19
20
21
CCD-0003696