Huawei iSitePower-M V100R002C00 User Manual page 81

iSitePower-M V100R002C00 (MAP15A1, MAB05B1)
User Manual
Item
Single/Parallel
Master/Slave
Mains Quantity
Genset Quantity
AC Mode
EPO-Triggered DI
Mains Capacity
Genset Rated Power
AC Meter Detected
Object
Network Operator
Home Router
PMS Domain Name
DNS IP Address
3.
Issue 01 (2021-09-30)
Setting Description
Single device scenario: Single System
Parallel system scenario: Parallel System
Single device scenario: N/A
Parallel system scenario: Set master and
the slave devices as required.
Set this parameter as required.
Set this parameter as required.
Select an AC power system.
Set the EPO switch
Set this parameter as required.
Set this parameter as required.
Set this parameter as required.
If 4G networking is selected, select an
operator.
If you use router WiFi networking, select
the name of the hotspot to be connected
to the router.
NMS domain name
IP address
Set Parallel ID and Local Cabinet No.. (Skip this step in the single device
scenario.)
NO TE
● Ensure that the parallel IDs of the master and slave devices are the same.
● Path: On the home screen, choose Site Unit > Configuration.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 System Commissioning
Value Range
Single System, Parallel System
Master, Slave
0–2
0–2
1-Phase
No/DIN1/DIN2
2.0–10000
12.5 kW by default
-
Other/Automatic
-
isitepower.huawei.com
10.10.10.10
76