Installation Environment Requirements - Huawei iSitePower-M V100R002C00 User Manual

iSitePower-M V100R002C00 (MAP15A1, MAB05B1)
User Manual
●
●
Cabling Requirements
●
●

2.4 Installation Environment Requirements

●
●
●
●
●
●
●
●
●
●
Issue 01 (2021-09-30)
Before connecting a power cable, check that the label on the power cable is
correct.
If the equipment has multiple inputs, disconnect all the inputs before
operating the equipment.
When routing cables, ensure that a distance of at least 30 mm exists between
the cables and heat-generating components or areas. This prevents damage
to the insulation layer of the cables.
Bind cables of the same type together. When routing cables of different types,
ensure that they are at least 30 mm away from each other.
Install the battery in a dry and well-ventilated environment to ensure good
heat dissipation.
You are advised to install the battery in a sheltered place or install an awning
over it.
Install the battery in a clean environment that is free from sources of strong
infrared radiation, organic solvents, and corrosive gases. Avoid exposing the
battery to direct sunlight or water.
The installation position must be far away from fire sources.
Children are not allowed to enter the installation position.
The installation position must be far away from water sources such as taps,
sewer pipes, and sprinklers to prevent water seepage.
The battery must be placed on a solid and flat supporting surface.
Do not place any flammable or explosive materials around the battery.
To prevent fire due to high temperature, ensure that the ventilation vents or
heat dissipation system are not blocked when the battery is running.
Do not expose the battery to flammable or explosive gas or smoke. Do not
perform any operation on the battery in such environments.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Safety Precautions
8