Determining The Installation Position - Huawei iSitePower-M V100R002C00 User Manual

iSitePower-M V100R002C00 (MAP15A1, MAB05B1)
User Manual
Type
PPE

5.1.3 Determining the Installation Position

Basic Requirements
●
●
●
●
Installation Angle Requirement
The product can be ground-mounted and wall-mounted. The installation angle
requirement is as follow:
●
Issue 01 (2021-09-30)
Tools and Instruments
Hydraulic pliers
Safety gloves
Safety boots
Do not install the product in a position where it is easy to touch because the
temperature of the chassis and heat dissipater is high when it is running.
Do not install the product in areas with flammable or explosive materials.
Do not install the product outdoors in salt areas because it may corrode and
cause fires. A salt area refers to the region within 500 m from the coast or
prone to sea breeze. The regions prone to sea breeze vary with weather
conditions (such as typhoons and monsoons) or terrains (such as dams and
hills).
Do not install the product in a position where children can touch it.
Do not install the product at forward tilted, back tilted, side tilted, horizontal,
or upside down positions.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Heat-shrink
tubing
Safety goggles
-
5 System Installation
Heat gun
Anti-dust mask
-
34