Network Commands; Id (Extended Pan Id); Sc (Scan Channels) - Digi XBee S2C Zigbee User Manual

AT commands

Network commands

The following commands are network commands.

ID (Extended PAN ID)

This command applies to the XBee/XBee-PRO Zigbee RF Module.
Set or read the 64-bit extended PAN ID. If set to 0, the coordinator selects a random extended PAN ID,
and the router/end device joins any extended PAN ID.
Write changes to ID to non-volatile memory using the WR command to preserve the ID setting if a
power cycle occurs.
Parameter range
0 - 0xFFFFFFFFFFFFFFFF
Default
0

SC (Scan Channels)

This command applies to the XBee/XBee-PRO Zigbee RF Module.
Set or read the list of channels to scan.
Coordinator - Bit field list of channels to choose from prior to starting network.
Router/End Device - Bit field list of channels scanned to find a Coordinator/Router to join.
Write changes to SC using the WR command to preserve the SC setting if a power cycle occurs.
Parameter range
0 - 0xFFFF (bit field)
Bit field mask:
Bit
0
1
2
3
4
5
6
7
8
9
XBee/XBee-PRO® S2C Zigbee® RF Module User Guide
Parameter
0x0B
0x0C
0x0D
0x0E
0x0F
0x10
0x11
0x12
0x13
0x14
Network commands
251