Table of Contents
Advertisement
5 - 14
Fig. 13 Connection of mains cable, protective earth cable and X885, serial number lower than 3000
Cables to CCD camera
The CCD camera including cable with connectors marked X201 and X202 is connected to
the biopsy controller.
1.
CAUTION
2.
Fig. 14 Object table arm before installation
Opdima?
Installation
X881
3 (GNYE)
Protective earth cable
1 (BN)
2 (BU)
X885
Connect the cable to X201 and X202 on the biopsy controller, see Fig. 11.
Sensitive electronic equipment!
Risk of damaging the camera.
Do not touch the pins in the contacts of the CCD camera.
Remove the screws (1/Fig. 14) and remove the cover (2/Fig. 14) of the object table
arm.
Register 3
1
2
SPB7-230.033.10
Rev. 03
08.02
Installation
Page 14 of 26
Siemens-Elema AB
SPS-UD
5
Solna, Sweden
Advertisement
Table of Contents
