Setting The Parameters; Logging Into Engineer Mode - andrews MAXXflo EVO Lite Installation And Maintenance Manual

9.2 Setting the parameters

Regional settings
Special operations
Settings
Expert t
Expert
Select user level
Enter password
Expert
Select user level
Enter password d
Expert
Login successful
Accessible for Engineer
9 Settings
In order to be able to access any of the parameters listed in section
9.1 it will be necessary fi rst to log into the controls as an engineer.

9.2.1 Logging into engineer mode

1. Using the Graphical User Interface (GUI), screen, move the con-
2. In the work area , use the control knob to select "Expert" fi eld and
Back
3. Select "Engineer" using the control knob and press ENTER to
Engineer
_ _ _ _ _
Back
4. Enter password '10001' by rotating the control knob, and then
Engineer
1
_ _ _ _ _
Back
5. Confi rm successful login by pressing ENTER.
Continue C
trol knob to select "Setup" page on the navigation bar and press
ENTER.
press ENTER.
select it. Press ENTER to continue into commissioning mode.
press ENTER after each number.
72 MAXXfl o EVO Lite