Error Memory; Accessing Error History - andrews MAXXflo EVO Lite Installation And Maintenance Manual

11.2 Error memory

Input/output test
Communication
Source
Consumer
Error History
Versions
Error history
6800 History 1
13:52
6803 Error code 1
133: Safety time exceeded
Error history
6805 SW diagnostic code 1
6806 Burner control phase 1
11 Troubleshooting

11.2.1 Accessing error history

The GUI screen can display information about the last 20 errors or main-
tenance messages recorded by the controls. Each of the 20 recorded
entries contains the time and date that the incident was logged, software
diagnostic code and burner control phase. Log in as an engineer to ac-
cess this history.
One logon is successful, Highlight "Error History" by rotating the control
knob and select the function by pressing enter.
(1/40)
10.08.2016
With the error history bar highlighted you will be able to view the error
history of the last 20 error incidents.
Refer to section 11.1 for guidance on the meaning of each error code.
(2/40)
Each historic error code page will also be accompanied by a second
393
page which includes a further sub code which can help to identify a spe-
4
cifi c issue in more detail.
Refer to section 11.1 for guidance on the meaning of each error code
and sub codes.
Back
Also useful is knowing the burner control phase in which the error has
occurred. Please refer to the table in 11.3 for details.
Refer to section 9.2.1 for details on how to log in as an engineer
93 MAXXfl lo EVO Lite