Setting Hot Water Temperature - andrews FASTflo WH42 Owner's Manual

When using RC-7508M

Setting Hot Water Temperature

On this Display
1
2
Here
(Eg.: 40°C)
WARNING
This is to prevent scalding if the temperature rises. Conversely, if the temperature drops or the
power switch is turned "off", the user may be upset when the water suddenly becomes much colder.
SETTING HOT WATER TEMPERATURE
Operation
Press the
ON/OFF
button to turn it
"On".
Use the
buttons to adjust
the temperature.
While the shower is being used, no one other than the user
should change the temperature, the power switch must not be
turned "off". (when using sub remote controller.)
Description
* The is lit.
ON/OFF
15