End User Operation; The Home Page; Setting The Time And Date - andrews MAXXflo EVO CWH 30/201 Operating Instructions Manual

2.0 ENd uSER OPERATION

2.1 THE HOME PAgE

Evaluation of information displayed:
Heater GUI Display
The start page for the heater GUI unit displays the most important information on the water heater and system
operation mode. There are no settings that can be applied whilst in this screen.

2.2 SETTINg THE TIME ANd dATE

To set the current time and date proceed with the following steps
To set the time:
3
1. Rotate until the settings tab is highlighted and press
lected
2. Rotate 3 to select the time fi eld value and press
3. Rotate and enter a new hour value by pressing
3
4. Rotate and enter a new minute value by pressing
3
To set the date:
5. Rotate to select the date fi eld and press
3
6. Rotate and enter a new date, month and year value by pressing
3
7. Rotate for additional regional settings or exit regional settings with "Back".
3
8. It is also possible to adjust the dates set for the start and end of summer time, for the purposes of automatic
clock adjustment
End user
Cascade fl ow temp
DHW temp 1
3
3
3
3
Regional settings
Time
Date
10
60.1 C
o
58.9 C
o
3
"Regional settings (1/3)" should already be prese-
after each item set
3
(1/3)
14:42
09.08.2016
Line only displayed
for 90,120 or 150kW
models
MAXXfl o EVO