Installation; Installing The Handheld - Bosch vivatmo pro Instructions For Use Manual

Installation

3 Installation
Before you start using your Vivatmo pro perform the following steps:
• Install the handheld.
• Install the basestation.
3.1

Installing the handheld

To install the handheld, insert the rechargeable battery.
18 © Bosch Healthcare Solutions GmbH
1. Open the battery compartment on the back of the Vivatmo pro handheld.
2. Hold the handling tab with two fingers and insert the rechargeable battery
into the battery compartment. Mind the triangle marks on the battery and
inside the battery compartment.
3. Apply the battery cover.
4. Remove protective cap and place the handheld on the basestation cradle
for charging. Charge before first use. The recharging time for a
completely exhausted battery is about 12 hours. As long as the LED is
blinking blue, the handheld is charging.
5. Press the ON/OFF button to turn on the handheld. You see all screen
icons and the system performs a brief self-test. Then the software version
on the handheld is shown.
6. Turn off the device before you replace the battery.
Instructions for use