Network Configuration - Bosch vivatmo pro Instructions For Use Manual

6.5.6 Network configuration

Vivatmo pro can be connected to a local area network to receive measurement orders, send back measurement results, export
patient related measurement data, or use a network printer. Vivatmo pro supports Ethernet and Wireless via WLAN connection.
Vivatmo pro shall not be used in unprotected networks. Data security using user credentials
shall be used in accordance with the local data security policies. Data is transmitted unencrypted.
Network Details
Language
Networktype
DHCP
SSID
Securityprotocol
Password
1. On the Network/Interfaces screen, select Network.
2. If a network access is configured already, select Show Network
Configuration.
WLAN
enabled The Network Details are:
BHCS
Networktype: WLAN or Ethernet
•
WPA2
DHCP: Dynamic Host Configuration Protocol
•
••••••••••
When DHCP is enabled, the device supports the configuration of the
network.
• SSID: Service Set Identifier
Shows the name of the WLAN network.
• Securityprotocol: Shows the security protocol used for your system.
Password: Shows the network password.
•
Instructions for use © Bosch Healthcare Solutions GmbH
Settings
55