Vivasuite Configuration - Bosch vivatmo pro Instructions For Use Manual

Export-/Backupfile Configuration
Select File Format (Expor t only)
PDF
CSV

6.5.9 Vivasuite configuration

Vivasuite is the digital Vivatmo ecosystem allowing use of services such as device management and remote software update.
Vivasuite runs in the Bosch IoT Cloud and applies highest standards regarding IT security and data privacy. The Vivasuite service
is not available in all countries. Ask your local distributor.
A registration to Vivasuite and pairing of your device is required. Your device must be connected to an internet- enabled network.
To connect Vivatmo pro to Vivasuite perform the following steps:
CONNECT WITH VIVASUITE
Connect your device to our connectivity
solution and benefit from vauable add-on ser vices.
Registration is required to download the newest
software updates to your device.
C O N N E C T N O W
5. Select CSV or PDF as export format.
The settings for the Location for Export/Backup are displayed.
6. Check the data and confirm with SAVE button when the data are correct.
D o n e
1. Vivasuite: Register an account on www.bosch-vivasuite.com and log into your
account.
2. Vivatmo pro: On the Administration Screen select Network/Interfaces. On the
Network/Interfaces screen, select Vivasuite configuration.
3. Vivatmo pro: Click through introduction and configure your network connection
(for details see "6.5.6 Network configuration") until devices show screen with
the pairing code.
Instructions for use © Bosch Healthcare Solutions GmbH
Settings
63