Restoring The Truck To Service After Maintenance And Repairs - Jungheinrich DFG 425s Operating Instructions Manual

4.14 Restoring the truck to service after maintenance and repairs

Procedure
• Thoroughly clean the truck, see "Cleaning" on page 194.
• Lubricate the truck according to the lubrication schedule, see "Lubrication
Schedule" on page 160.
• Clean the starter battery, grease the terminals and connect the starter battery.
WARNING!
Faulty brakes can cause accidents
As soon as the truck has been started, test the brakes several times.
Report any defects immediately to your supervisor.
Tag out and decommission the faulty industrial truck.
Only return the truck to service when you have identified and rectified the fault.
• Start up the truck, see "Preparing the Truck for Operation" on page 65.
198