Restoring The Truck To Service After Maintenance And Repairs - Jungheinrich EFG 110k Operating Instructions Manual

5.12

Restoring the truck to service after maintenance and repairs

Procedure
• Thoroughly clean the truck – see page 162.
• Lubricate the forklift truck according to the lubrication schedule – see page 145.
• Equipped with lead-acid battery (t): Clean the battery, grease the battery terminal
screws with terminal grease and connect the battery.
• Equipped with lithium-ion battery (o) without interface converter on the battery:
Insert the truck-side control line into the connection on the battery trough.
• Equipped with lithium-ion battery (o) with interface converter on the battery:
• Pull the battery forward.
• Insert the control line into the battery connection at the top of the battery or the
inside of the trough.
• Slide the battery back in.
• Connect the battery to the truck.
• Close the battery connector lock: Tighten the bolted bar.
• Insert the truck control line into the interface converter on the battery.
• Charge the battery – see page 55.
• Commission the forklift truck – see page 71.
166