Restoring The Truck To Service After Maintenance And Repairs - Jungheinrich EJE 225 Operating Instructions Manual

4.10

Restoring the truck to service after maintenance and repairs

Procedure
• Thoroughly clean the truck, see page 155.
• Lubricate the truck according to the lubrication schedule, see page 152.
• Clean the battery, grease the terminal screws and connect the battery.
• Charge the battery, see page 45.
• Start up the truck, see page 67.
WARNING!
Faulty brakes can cause accidents
As soon as the truck has been started, test the brakes several times.
uReport any defects immediately to your supervisor.
uTag out and decommission the faulty industrial truck.
uOnly return the truck to service when you have identified and rectified the fault.
Z
If there are switching problems in the electrical system, apply contact spray to the
exposed contacts and remove any oxide layers on the contacts of the controls by
applying them repeatedly.
166