Table of Contents
Advertisement
High mounted brake lamp
1.
From inside the luggage
compartment, unscrew the bulb
holder.
A
A
High mount brake lamp bulb
2.
Replace the bulb and reinsert the
bulb holder.
Note: There is no bulb fi tted to the
interior high mounted brake lamp when
the vehicle has been fi tted with a spoiler
mounted brake lamp.
Lighting
Rear license plate lamps
1.
Carefully insert a fl at blade under
one side of the lamp assembly.
2.
Press gently on the locking tab.
3.
Lift the lamp assembly out of the
licence plate trim.
4.
Disconnect the wiring connector.
5.
Turn the bulb holder approximately
1/8th turn anti-clockwise until it is
free.
6.
Pull the bulb from the socket.
7.
Replace the bulb and bulb holder
and connect the wiring connector.
8.
Push the lamp assembly into the
licence plate trim until the locking
tabs engage.
-61-
Hide quick links:
Advertisement
Table of Contents
