Table of Contents
Advertisement
4.
Insert the screwdriver into the
opening at the side of the keypad
container and rotate it to start
opening the container.
5.
Insert the screwdriver into the
opening at the front of the keypad
container and rotate it to open the
container completely. Be careful not
to lose the key ring.
6.
Insert the screwdriver into the
opening marked with an arrow
and carefully prise out the battery.
Take care not to touch the battery
contacts or the printed circuit board.
Locks and security
7.
8.
9.
-42-
Insert a new 3V CR 2032 battery.
The positive contact of the battery
(marked with a +) must face
upwards.
Snap the two halves of the keypad
container back together.
Assemble the key blade component
and keypad container and press
firmly until they snap together.
Hide quick links:
Advertisement
Table of Contents
