Ford Falcon (FG) 2010 Manual page 243

Phone and Bluetooth (where fitted)
Muting the current call
When in a call, press the PHONE button
to mute the microphone. The high
series screen will display a crossed out
microphone icon in the phone status
icon area to reflect the muted state.
The other party will be unable to hear
you speak, although you will still be able
to hear the other party.
Press the PHONE button again to un-
mute the microphone.
Ignition Off functionality
Calls cannot be made or received during
keyless play mode (Refer to Keyless Play
Mode in the Audio section).
However during a call, switching the
ignition off will maintain that call.
CAUTION
If the Bluetooth system is used
for an extended period of time
(i.e. more than one hour) with the ignition
off, please make sure that the engine
is running to avoid draining the vehicle
battery.
Ending the current call
When in a call, press and hold the
PHONE button to end the call.
Handling call waiting
Second incoming call
Note: The second incoming call function
must be enabled on your phone and
must be supported by your network
provider.
When a second incoming call is received,
a tone will sound through the audio
system and a second phone is displayed
in the Bluetooth status icon area.
Only the incoming caller ID will be shown
(network dependent). During a call, if
two calls are present (one call active/
one call on hold) the caller ID will not be
shown.
Accepting a second incoming call
Press the PHONE button to accept a
second incoming call. The current call will
be placed on hold.
-243-