Cruise Control - Ford Falcon (FG) 2010 Manual

CRUISE CONTROL

WARNING
To avoid the possibility of loss of
control, the cruise control should
not be used in heavy traffi c (city driving)
or on winding, slippery or unsealed
roads.
The cruise control system attempts to
maintain the vehicle speed set by the
driver. The system has a set speed
display in the MFD (Multifunction Display).
When the cruise control is set, it shows
the speed the cruise control is trying to
achieve. When in coast, it shows the
previously set speed.
Illuminated if CRUISE is enabled
Illuminated when CRUISE is SET
The cruise control system has been
designed to allow easy setting to speed
"zones". For convenience, there is an
indexing capability which adjusts the
set speed to the next speed zone up or
down as directed by the driver e.g. 60
km/h, 70km/h, 80km/h etc.
Cruise control
To enable cruise control
Pull the CRUISE switch on the steering
wheel to enable the cruise control
system.
The MFD indicates "CRUISE" when the
cruise control is enabled and ready to
be set.
CRUISE SET speed
The "CRUISE" indicator may fl ash if the
cruise control is not ready or there is a
fault in the system. The cruise control
system is not ready if it has not seen a
brake application since ignition key ON.
-132-