Ford Falcon (FG) 2010 Manual page 233

Interior Command Centre (ICC)
Note: Adjusting the brightness intensity
with your headlights OFF will set the
brightness level for day mode. Adjusting
the brightness intensity with your
headlights ON will set the brightness level
for night mode.
7.1.2
Contrast
Turn the ICC Control Dial clockwise to
increase the contrast intensity of the ICC
screen.
Turn the ICC Control Dial counter-
clockwise to reduce the contrast
intensity of the ICC screen.
7.2 Screen Off
Selecting Screen Off will turn the screen
off after two seconds.
If you adjust any audio, climate or other
functions that have an associated screen
display, the screen will momentarily be
reactivated for up to seven seconds
after the final adjustment has been made
before it goes black again.
Press the OK button to select or
unselect Screen Off.
Shortcut: When in the homescreen
press and hold the Audio System On/
Off button for 3 seconds until the screen
display goes black. To turn the constant
screen display back on, when in the
homescreen press and hold the Audio
System On/Off button for 3 seconds.
7.3 Ford Logo
Low Series: Selecting Ford Logo will
display the Ford Logo upon start-up of
the ICC Screen.
High Series: Selecting Ford Logo
Animation will display a short animation of
the Ford Logo upon start-up of the ICC
Screen.
Press the OK button to select or
unselect Ford Logo Animation.
Walking Animation
7.4
(High Series Only)
Selecting Walking Animation will display
a short animation of the climate control
figure on start-up of the ICC Screen.
When performing an ignition key cycle,
you must pause on the ACC position to
see the animation.
7.5 Default Display Settings
Default Display Settings will restore the
factory default settings for the display
menu.
Default Display Settings can only be
selected if the configuration of display
settings deviates from the default.
Press the OK button to select Default
Display Settings.
8. Default Vehicle Settings
(Menu > Settings > Default Settings)
Default Display Settings will restore the
factory default settings for the all the
items in the Settings menu.
Default Vehicle Settings can only be
selected if the configuration of vehicle
settings deviates from the default.
Press the OK button to select Default
Vehicle Settings.
-233-