Ford Falcon (FG) 2010 Manual page 12

Using the menu screens
• Press the MENU (7) button to bring
up a list of customisable display
features
• Use the scroll up (3) and down (4)
arrows to locate the required feature
• Press the SEL (5) button to enable
adjustment or resetting of that
feature
Set dimming
Adjusts the intensity of the dial and
display illumination. There are separate
settings for daytime and nighttime
illumination.
Set overspeed
Press (or press and hold) up (3) and
down (4) arrows to select the desired
speed. Pressing SEL (5) turns overspeed
on and off.
Reset all
Pressing SEL (5) puts all screen settings
to the factory default.
Set dist to dest
Press up (3) or down (4) arrows to
select the desired distance. The distance
displayed will then decrease as you
travel. Press and hold SEL (5) to reset
distance to zero.
Reset all trip
Press up (3) or down (4) arrows to move
through trip functions. Press SEL (5) to
reset the selected function.
Warnings
Displays a list of current warnings. Press
up (3) or down (4) arrows to select
desired warning.
Quick Reference Guide
-12-
Settings
Press up (3) or down (4) arrows to move
through settings. Press SEL (5) on the
currently highlighted setting to adjust or
turn on or off.
Sub content
Press up (3) or down (4) arrows to move
through sub content list.
Press SEL (5) on the currently highlighted
item to enable or disable the item in the
sub menu.
Full details on how to use the
Multifunction display are found in the
Instrumentation section of this Owner
Manual.
UNLOCKING/OPENING
DECKLID
To open the boot, press the boot
opening button which is located below
the Ford badge on the boot decklid.
The boot opening button is only enabled
when the doors and/or the boot are
unlocked.
To unlock the boot, use
either the boot or door
unlock buttons on the
keypad.