Ford Falcon (FG) 2010 Manual page 130

Parking aids (where fitted)
Note: When towing the reverse sensing
system is disabled if the trailer plug is
connected to a genuine Ford socket.
This will be evident to the driver as the
initialisation beep will not be heard when
selecting reverse gear.
Note: Always keep the sensors located
on the rear bumper / fascia free from
dirt, snow and ice (do not clean the
sensors with sharp objects). These
elements may cause the system to
operate inaccurately.
Note: If the vehicle's rear bumper/fascia
is damaged, leaving it misaligned or
bent, the sensing zone may be affected
causing inaccurate measurement of
obstacles or false alarms.
For vehicles with a High Series Interior
Command Centre (ICC), a graphic is
displayed on the colour TFT screen to
accompany the audible warning. If the
reverse sensing system detects an
object within range, it will be displayed on
the ICC screen as one or more columns
of coloured indicators, corresponding
to the size and relative position of the
object.
If a rear camera is fitted, there is an
option to toggle between the reverse
sensing system graphic and the real-
time image supplied by the rear camera
by using multifunction button 6.
1 2 3
Note: If a rear camera is fitted, the
screen will reset to camera display mode
(default setting) each time the ignition
key is cycled off and on.
The first diagram illustrates a vehicle
approaching a small object, e.g. a bollard
and the second diagram represents a
vehicle approaching a large object, e.g.
a wall.
4 5 6
-130-