Table of Contents
Advertisement
Programming the unlock
strategy for a keypad
Keypad method
Both keypads are set at the factory to
single stage mode as the default.
To change the keypad from single stage
(default) to two stage strategy:
Close all doors and hold both the lock
and unlock buttons down simultaneously
for 5 seconds. The indicators will flash to
indicate that the unlock mode has been
changed for that keypad.
To change the keypad from two stage
to single stage strategy, repeat the
procedure above. The indicators will
flash to indicate that the unlock mode
has been changed for that keypad.
Extra keypads, purchased from your
Ford Dealer, can also be programmed in
the same way.
Interior Command Centre method
To programme the unlock strategy for
the car (all keypads will use the same
strategy), using the ICC (see also
"Interior Command Centre Settings"
section):
•
Press the Menu button
•
Select "Settings" from main menu
•
Select "Unlocking" from Settings
menu
•
Check the "2 Stage Unlock" box
•
Use the Back button to cycle back
to the main screen.
Locks and security
Unlocking boot
The boot decklid opening button is
enabled when the doors and boot are
initially unlocked.
To unlock the boot and leave the doors
locked, press the boot unlock button on
the remote. The indicators will flash once
indicating that the boot decklid opening
button is enabled.
The boot can be opened and shut
using the boot decklid opening button
for up to 45 seconds after the press of
the boot release button on the remote.
For security reasons the boot decklid
opening button is disabled after this time.
-39-
Hide quick links:
Advertisement
Table of Contents
