Do not lean over the battery when
making connections.
Engine starting procedure
1.
Start the engine in the vehicle with
the booster battery and let it run for
a few minutes.
2.
Start the engine in the vehicle with
the discharged battery.
3.
Leave the jumper leads connected
until the engine reaches idle speed
(at least one minute) otherwise
damage to the electrical system
may occur.
4.
Switch the heater fan of the vehicle
with the discharged battery to
the fastest position to 'load' the
vehicle's electrical system prior to
disconnecting the jumper leads.
5.
Disconnect the leads in the reverse
order.
CAUTION
Do not disconnect or change
over the discharged battery while
the engine is running as damage to the
electrical system may occur.
Vehicle battery
-178-