Advertisement
See HOW TO TURN ON THE POWER on
page 12.
Press the Home button or press either the Speed
button or the Calorie button repeatedly to select the
manual mode.
If a wireless iFit module is not inserted into the con-
sole and connected to iFit, the manual mode will be
selected automatically.
As you pedal, change the resistance of the ped-
als by pressing the Resist. increase and decrease
buttons or by pressing one of the numbered 1 Step
Resistance buttons.
Note: After you press a button, it will take a
moment for the pedals to reach the selected resis-
tance level.
To vary the motion of the pedals, you can change
the incline of the frame. To change the incline,
press the Incline increase and decrease buttons.
Note: After you press a button, it will take a
moment for the frame to reach the selected
incline level.
The display can show the following workout
information:
—This display mode will show the
approximate number of calories you have burned.
will show the approximate number of calories you
are burning per hour.
—This display mode will show
the distance that you have pedaled in miles or
kilometers.
—This display mode will show the incline
level of the frame for a few seconds each time the
incline level changes.
—This display mode will show your heart rate
when you use the handgrip heart rate monitor or
the optional chest heart rate monitor (see step 5).
—This display mode will
show the resistance level of the pedals for a few
seconds each time the resistance level changes.
—This display mode will show your pedaling
speed in revolutions per minute (rpm).
—This display mode will show the total num-
ber of strides you have pedaled.
—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.
The matrix offers several display tabs. Press the
Display button until the desired tab is shown. You
can also press the increase and decrease buttons
next to the Enter button.
—This tab will show a profile of the speed
settings of the workout. A new segment will appear
at the end of each minute.
—This tab will show a track that represents
1/4 mile (400 m). As you exercise, the flashing
rectangle will show your progress. The My Trail tab
will also show the number of laps you complete.
—This tab will show the approximate
amount of calories you have burned. The height of
each segment represents the amount of calories
burned during that segment.
—This tab will show a profile of the incline
settings of the workout. A new segment will appear
at the end of each minute.
—This display mode
Advertisement
