1.1 Foreword
V200 GNSS RTK receiver brings superior performance and high efficiency that will support your
fieldwork with reliable solutions. Its deployment of the advanced RTK engine and new-generation IMU
guarantees a 25% performance improvement even in the most demanding environments. Thus you can
count on Hi-Target V200 to provide you with better productivity.
1.2 Features
1. Its more durable and portable with an ultra-light EPP material instrument case.
2. It can bring accurate and reliable results and boost efficient fieldwork with a self-developed built-in
IMU and core algorithm.
3. Equipped with the High-performance Patch Antenna, it both enhances the low elevation angle
tracking capabilities and maintains a high gain for higher elevation satellites.
4. It does not provide overly optimistic coordinate quality and guarantees the high reliability of RTK fixed
positions, improving accuracy better than 8 cm by 20 %.
5. Hi-Fix technology enables both continuous connectivity and quality results.
1.3 Use and precautions
The V200 GNSS receiver is designed to have chemical and impact resistance, but precision instruments
require careful use and maintenance.
Notice:
is used and stored. For detailed requirements, please refer to Chapter 3:
Technical specification.
In order to ensure the continuous tracking observation of the satellite and quality of the satellite signal,
the space above the station should be as wide as possible, with no obstacles above the 15° elevation
angle. To reduce the interference of various electromagnetic waves on the GNSS satellite signal, there
should be no strong electromagnetic interference within a range of about 200m around the station, such
as TV towers, microwave stations, and high-voltage transmission lines. To avoid or reduce the
occurrence of multipath effects, the station should be away from terrain and features with strong
reflectors, such as high-rise buildings, water, etc.
The receiver must be within the specified temperature range when it
V200 GNSS System User Manual
2
Need help?
Do you have a question about the V200 and is the answer not in the manual?