Table of Contents
Advertisement
18.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
19.
Always completely disconnect the power cord from your chassis whenever you
work with the hardware. Do not make connections while the power is on. Sensi-
tive electronic components can be damaged by sudden power surges.
20.
Always ground yourself to remove any static charge before touching the mother-
board, backplane, or add-on cards. Modern electronic devices are very sensi-
tive to static electric charges. As a safety precaution, use a grounding wrist
strap at all times. Place all electronic components on a static-dissipative surface
or in a static-shielded bag when they are not in the chassis.
21.
Any unverified component could cause unexpected damage. To ensure the cor-
rect installation, please always use the components (e.g., screws) provided with
the accessory box.
22.
This product is not intended for use by children (this product is not a toy).
(1) This equipment is not suitable for use in locations where children are likely to
be present.
23.
Improper installation of VESA mounting can result in serious personal injury!
Use suitable mounting apparatus to avoid risk of injury. VESA mount installation
should be operated by professional technician, please contact the service tech-
nician or your retailer if you need this service.
24.
Repair of the device may only be carried out by trained service personnel.
Advantech recommends that a service contract be obtained with Advantech
Service and that all repairs also be carried out by them. Otherwise the correct
functioning of the device may be compromised.
25.
Do not modify this equipment without authorization of the manufacturer.
26.
To avoid risk of electric shock, this equipment must only be connected to
grounded supply mains.
27.
Remove the power cord to fully turn off the device.
28.
Never immerse equipment or electrical connectors in water or other liquids.
29.
Remove the power cord before changing the fuse and replace only with fuses of
the same rating and type.
30.
Observe local occupational health and safety requirements and guidelines for
manual material handling.
31.
At least two people are needed to move equipment. Do not attempt to move
equipment by yourself.
32.
Use only the power cords and power supply units provided with your equipment.
The equipment might have one or more power cords.
33.
Operation of the device without regulatory approval is illegal.
34.
Disposal of a battery (or battery pack) into a fire or a hot oven, or mechanically
crushing or cutting of a battery (or battery pack) can result in an explosion!
Leaving a battery (or battery pack) in an extremely high temperature surround-
ing environment that can result in an explosion or leakage of flammable liquid or
gas. A battery (or battery pack) subjected to extremely low air pressure may
ACP-2000 User Manual/ 用户手册 / 用戶手冊
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
iv
Advertisement
Table of Contents
