7-2 USB connector X1
By connecting to a computer or controller via USB interface, the following operations are available
parameter reference / change parameter save / load monitoring of status checking alarm status or alarm history.
Name
USB signal
For manufacturer use
Signal ground
The connector shape on the driver side is USB mini - B.
R6.0
Symbol
pin No
VBUS
1
Communicate with a computer or a controller
D-
2
D+
3
Do not connect anything to this connector.
4
Signal ground
GND
5
Description
Motion Control Business Unit, Panasonic Corporation
No. SX-DSV03224-41-