Advertisement
You will need
Allen Key
4 x Bolts
(H2)
(H1)
Align the holes on the Seat Plate (P2) with the bottom of the Seat(P1) and use the Allen Key(H2)
to fasten 4x Bolts (H1) to the Seat (P1).
Ensure the front of the Seat Plate(P2) is in the correct direction before securing to the base of the
Seat(P1).
Step 4
Position the centre hole on the Seat Plate(P2) over the top of the Gas Lift (P3).
Carefully lower the Seat(P1) onto the Gas Lift (P3).Press seat down firmly.
Check the connection is secure before sitting in the chair.
fantasticfurniture.com.au
(P2)
(P3)
(H2)
(H1)
(P2)
(P1)
(P1)
Page 6
Advertisement
