System Recovery; Microsoft Windows; Bios; Figure 8 - System Recovery Workflow - Oracle MICROS Workstation 6 Setup Manual

System Recovery

You can perform system recovery on the Workstation 6 to:
•
•
•
You can perform system recovery using the Microsoft Windows operating system
recovery feature, from the BIOS, or by using the recovery button on the Workstation 6.
Begin system recovery
System restarts

Figure 8 - System Recovery Workflow

Microsoft Windows

You can use the Microsoft Windows operating system recovery function to restore
system settings:
1. Swipe left on the touchscreen or move your mouse to the top-right corner of the
2. Click Settings.
3. On the Settings screen, click Change PC settings.
4. On the PC settings screen, select Update and recovery.
5. On the Update and recovery screen, click the Get started button under Remove
6. On the Reset your PC dialog box, click Next, then click Fully clean the drive, and
7. When the Workstation 6 completes restoration and reboots, you can begin

BIOS

To perform system recovery from the BIOS:
1. Enter the BIOS.
Troubleshooting
Wipe the hard drive.
Restore all PC settings to factory settings.
Remove all user accounts and settings.
start screen.
everything and reinstall Windows.
then click Reset to finish restoring factory settings. If you select Just remove my
files, the system recovery process fails.
operating system setup.
a. Connect a USB keyboard to the Workstation 6.
b. Power on or restart the workstation.
c. Press F2 immediately after pressing the power button and before the
BIOS splash screen. You can tap F2 repeatedly until the Configuration
BIOS passes booting to
the Windows Recovery
Environment (WinRE)
located on the eMMC
System recovery starts in
the Out-of-Box
Experience (OBE) state
WinRE restores the
factory image to the C:\
drive
39