Oracle MICROS Workstation 6 Setup Manual page 29

Setting
422/232 Mode Selection
Power Failure Restoration
Factory Recovery
Save and Exit Flag
Workstation 6 Utilities and Configurations
Description of Options
If you enabled 422 Mode Selection, select 422 Mode or
232 Mode depending on the serial connection you want
the IDN port to accept.
Select the action taken by the system in the event of a
power failure:
• Remain Off: the system remains powered off
even if it was originally powered on.
• Last state: if the system was on when power
failed, the system powers on. If the system was
off, the system remains off.
Power On: the system powers even if it was
•
originally powered off.
Select factory recovery settings:
• Disabled: you cannot perform factory recovery.
• Enabled: you can perform factory recovery.
• Phase 1: initiates the factory recovery process.
• Phase 2: loads the recovery image.
Enable or Disable saving and exiting.
29