Creating A Driver Disk - 3Com 3C996B-T User Manual

Creating a Driver Disk

Create driver disks using the MakeDisk utility (setup.exe file). This utility will allow you to
create disks with the following drivers:
Windows XP 32-bit Driver
I
Windows XP 64-bit Driver
I
Windows 2000 Driver
I
Windows NT Driver
I
NetWare Driver
I
Advanced Server Features—Windows XP 64-bit Driver
I
Advanced Server Features—Windows 2000 Driver
I
Advanced Server Features—Windows NT Driver
I
Advanced Server Features—NetWare Driver
I
Advanced Server Features—Linux Driver
I
1 Insert the 3Com Installation CD in the CD-ROM drive. Allow your operating system's
autorun feature to launch the Master Navigator.
2 Click NIC Software.
3 Click Installation Utilities.
4 Click Create Installation Diskette.
5 In the Welcome window of the Diskette Creation Utility, click Next.
6 Insert a 3.5" disk into floppy drive A (default) or B. Click Next.
7 Follow the remaining Diskette Creation Utility commands and insert diskettes when
prompted. When all driver diskettes have been created, the message "Diskette Copy
Complete" appears on your screen.
8 Click OK to end the Diskette Creation Utility.
9 When all driver diskettes have been created, the information screen will appear,
confirming that the drivers were successfully created. Click OK.
Creating a Driver Disk
5