Install The Front Operator Panel (3.5-Inch Drive Model) - Lenovo ThinkSystem SR250 V2 Maintenance Manual

Hide thumbs Also See for ThinkSystem SR250 V2:
Table of Contents

Advertisement

After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the front operator panel (3.5-inch drive model)

Use this information to install the front operator panel (3.5-inch drive model).
About this task
Attention: Read the following section(s) to ensure that you work safely.
"Safety" on page iii
"Installation Guidelines" on page 51
Watch the procedure
A video of this procedure is available at YouTube:
BPZOAqQMD37KjuxaVHVBkH
Procedure
Step 1.
Slide the front operator panel and cables into the slot on the front server.
Figure 73. Front operator panel (3.5-inch drive model) installation
Step 2.
Install the two screws that secure the front operator panel.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 4
Hardware replacement procedures
85

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d7q7d7r

Table of Contents